Do treści strony

High Quality Audio Cable

  • Balanced male jack to male XLR
  • 2 x 0.20 mm²
  • With Neutrik (Rean) connectors
  • Gold-plated contacts
  • Casing: Black metal
  • Hand-soldered
  • Length: 0.6 m
  • Produkt dostępny od Wrzesień 2006
  • Numer artykułu 198255
  • Jednostka sprzedaży 1 szt.
  • Length 0,6 m
  • Connector 1 Jack 6,3mm TRS male
  • Connector 2 XLR 3-pol male
31 zł
Ceny z podatkiem VAT
Rabat ilościowy
Cena jednostkowa Oszczędzasz Ilość
31,00 zł 1
29,70 zł 4,2% 5
28,40 zł 8,4% 10
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

528 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

159 Opinie

A
Pierwszorzedna jakosc
Anonimowy 05.08.2016
Kabel uzywam do podlaczenia syntezatora z komputerowa karta dzwiekowa. Bardzo podoba mi sie jakosc wykonania i pozlacana koncowka co ma szczegolne znaczenie przy nagrywaniu wysokiej jakosci audio.
Przystepna cena jest takze wielkim plusem.
Polecam!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

RW
Rewelacja!
Robert Waff 16.09.2020
bardzo praktyczne i dobrze wykonane przejściówki. Używam do stołu behringer X18. Czasami tylko mogą się odkręcać obudowy Jack, ale wystarczy dokręcić. Wtyczki są dobrze wykonane, nie słychać spadku jakości dźwięku.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
decent and sturdy connector or patch cable
LutherD 06.02.2022
I'm a sound artist and a field recordist. I have a few of these cables, in several lengths. I use them to connect active speakers to my soundcard, to go from my interface to amps or mixers, and on occasion I've even used them as adaptors for bespoke microphone inputs.

Cordial is a good brand, and the neutrik rean connectors work flawlessly. Since there is hardly any difference in sound quality between expensive and cheap cables, the distinction is really in the built quality, and here cordial is usually a brand to be trusted. I use these in the studio, but also when working on location (concerts, installations), and they perform adequately. I've not had a problem with one of them so far. And the gold plated connectors protect them against oxidation.

great connector or patch cables for a correct price.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
c
This is a general review i repeat in many of my cable purchases:
cutedaddy 26.04.2025
Love getting cables @Thomann

They have a huge variety of cable types, lenghts, terminations, adaptors (different terminations on the same cable), and the price is always right.

If the cable is for stationary use and/or in permanent/fixed positions, i always go for the cheapest one. When it will have a somewhat rougher, more demanding life, with lots of travelling and disconnecting hundreds of times, they offer some higher quality versions at a still very nice price level.

And there's other qualities that become important when your cable length becomes considerable (like sensitivity to EMI, microphonics, etc.). In that case the the better quality usually pays off.

Be aware though, that audio technology is a very well understood science.
Magic or miracle cables don't exist: extremely expensive cables sometimes promoted by audio suppliers are a hoax. Ask any professional audio FOH-technician, producer or engineer!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

OSZAR »