Do treści strony

Headphone holder

  • For attachment to tabletops
  • Wide surface for up to two headphones
  • Slots on the front side for in-ear earphone
  • Support frame: 60 x 100 mm
  • Weight: 0.183 kg
  • Suitable for surfaces with max. thickness of 45 mm
Produkt dostępny od Luty 2014
Numer artykułu 333619
Jednostka sprzedaży 1 szt.
58 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

399 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

wykończenie

199 Opinie

z
perfekcja
zielinski14 02.12.2021
Uchwyt wykonany profesjonalnie, z dobrej jakosci materiałów, solidny jak wszystkie produkty firmy K&M. Warto zapłacić trochę więcej aby cieszyć się konkretnym produktem!
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

i
polecam
itisbunny 03.12.2024
Mega sprawa, mała rzecz a cieszy, choć mogłaby mieć grubszą warstwę gąbki ochronnej do biurka, zostały lekkie ślady na krawędzi.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S&
Made in Germany!
S & K 13.10.2020
I was looking for a way to keep my headphones nearby without just laying them down on the desk or hanging them over my secondary screen.
All alternatives were either made in China or weren't specified (which by default means China) but then I found out at least these specific products of K&M are made in Germany!

Easy to install on any kind of desk, table or surface if there's enough space at the edge for it to clamp onto. It easily holds up to 2 headphone sets and keeps hanging, solid as a rock.
The major advantage to adhering something permanently is that you can take this one off completely or place it somewhere else without any trouble.

Very happy I found this product after looking around for a while. They're great to use in any kind of studio or for casual home use.

My only word of advice would be to Konig & Meyer in that they should advertise the "Made in Germany" aspect more as it's definitely a strong point for me and many other consumers!
montaż
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
Bought to try out really...
tonymckenzie.com 17.01.2022
I had never bought any headphone holders before but have had headphones (it seems) forever... so it was time to try one or two out.

I bought this type that 'clamp' on to a desk and used these with the ProducerRTA desk.

For me, while they do work reasonably well, I was not really sold on the mounting method to the desk and once fitted if you happen to go past them and knock the holder it will move around on the desk.

It is possible to tighten them further, but in my case that did not really solve the case either - could be useful if placed 'out of the way' but in my studio they did not really help me. Worth bearing in mind...

Otherwise in a different scenario they do work... its just down to how well you need them to fit on a particular desk and whether the holder will get knocked. Both are considerations worth remembering.
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

OSZAR »