Do treści strony

Double Gate Rack

  • 12 U working height
  • 45 cm Installation depth from rack rail to rack rail
  • Material: 9 mm multiplex
  • 30 x 30 mm Aluminium frame profile
  • Stepless rack rails front and rear
  • Front and rear covers
  • 8 Spring-loaded butterfly locks
  • 4 Folding handles
  • Large steel ball corners
  • 2 rack rails
  • Outer dimensions (W x H x D): 55.3 x 60.3 x 64 cm
  • Weight: 21.4 kg
  • Colour: Phenol brown
  • Incl. Screw set
  • Made in Germany
  • Produkt dostępny od Marzec 2017
  • Numer artykułu 408521
  • Jednostka sprzedaży 1 szt.
  • Formfactor 19"
  • Construction Type Double-Door
  • Vertical Height Units 12 U
  • Internal Depht [mm] 450 mm
  • Horizontal Height Units 0 U
  • with display stand No
  • Rack rail at the back Yes
  • Service flap No
  • With Wheels No
  • Trolley No
  • Shock Mount No
  • Clasps Butterfly
  • Material 9 mm Plywood
  • Colour dark Brown
  • External Width 553 mm
  • External Height [mm] 603 mm
  • External Depht [mm] 640 mm
  • Weight 21,4 kg
1 399 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

4 Oceny klientów

4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

3 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
m
Great case, but why skimp on the backrail attachement nuts
markkus 27.08.2022
The depicted rail pre-filling is (at what I presume the back) is not a 2 nuts/U ratio. If your use-case demands equal ratio front to back for 1U units, this rack comes short and it can't be adjusted. This is already a planning issue as I need to decide how many nuts I put in between and below/above 4 drawers I have in here and back facing patch panels (network and sound) and power strips. This for a margin of less than €3,00 total cost on an almost €300 case is typical Thomann skimping on quality. Also the depicted side rails with had no nuts in any of them, but they at least can be back filled. Otherwise quality gear, not worth sending it back for (knowing their low customer service standard), still something which shows quality issues at Thomann.
stabilność
montaż
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

OSZAR »